Straight & Cut Wire
All Categories
Major galvanizers prefer our wire. We offer Super Soft tensile so you can use the added strength without tying issues.
- Consistency - Due to our fully annealed process, there will not be any "hot spots" or brittle pieces of wire that cause tie breaks and parts lost in the kettle.
- We will cut the wire to the length needed in order to ensure waste reduction (example: using 48" rather than a pre-cut 44" could be costing you more than 10% in wire usage).
Item # |
Gauge |
Diameter |
Coil Break Range |
Tensile Strength |
Length |
---|---|---|---|---|---|
BSAC 13G X 48" | Gauge N/A 13 Ga | Diameter N/A 0.091 in | Coil Break Range N/A 325 to 390 | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 48 in |
BSAC 14G X 72" | Gauge N/A 14 Ga | Diameter N/A 0.080 in | Coil Break Range N/A 251 to 301 | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 72 in |
BSAC 14G X 144" | Gauge N/A 14 Ga | Diameter N/A 0.080 in | Coil Break Range N/A 251 to 301 | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 144 in |
BSAC 16G X 12" | Gauge N/A 16 Ga | Diameter N/A | Coil Break Range N/A | Tensile Strength N/A 50,000 - 60,000 psi | Length N/A 12 in |