• Straight & Cut Wire
Major galvanizers prefer our wire. We offer Super Soft tensile so you can use the added strength without tying issues.
  • Consistency - Due to our fully annealed process, there will not be any "hot spots" or brittle pieces of wire that cause tie breaks and parts lost in the kettle.
  • We will cut the wire to the length needed in order to ensure waste reduction (example: using 48" rather than a pre-cut 44" could be costing you more than 10% in wire usage).
1 - 25 of 54 | Results Per Page | View | Unit of Measure
1 2 3 
Request Information Compare Items

Item #

Gauge

Diameter

Coil Break Range

Tensile Strength

Length

Sort by
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 108 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 120 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 141 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 252 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 48 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 54 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 60 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 72 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 84 in
N/A 10 Ga N/A 0.135 in N/A 715 to 858 N/A 50,000 - 60,000 psi N/A 96 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 102 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 108 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 118 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 120 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 132 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 144 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 30 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 36 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 45 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 46 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 48 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 54 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 58 in
N/A 11 Ga N/A 0.121 in N/A 575 to 690 N/A 50,000 - 60,000 psi N/A 60 in
1 - 25 of 54 | Results Per Page | View | Unit of Measure
1 2 3 
Back to Top